General Engineer at Joint Program Executive Office for Chemical Biological Radiological and Nuclear Defense (JPEO CBRND)

View job on Handshake

Employer: Joint Program Executive Office for Chemical Biological Radiological and Nuclear Defense (JPEO CBRND) – JPEO CBRND

Expires: 05/19/2020

Pathways Recent Graduate Opportunity! Open for upcoming May/June Grads.This position is being filled under the Direct Hire Authority for Post-Secondary Students and Recent Graduates.Full Performance Level is a GS-12. Paid relocation is being offered.Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.ResponsibilitiesAssist in the design and development of engineered devices, equipment or systems using established criteria or specifications.Assist in the inspection and evaluation of engineered projects and resources.Identify engineering problems and recommend corrective action.Review technical engineering project design documents, computations, and submittals.Prepare technical engineering reports and studies with completeness, technical adequacy, and adherence to prescribed format of reports.QualificationsBasic Requirement for General Engineer:A. Degree: Bachelor’s degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Degree must be completed by June 2020.)ORB. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure – Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board’s eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test – Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses – Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum – Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:Specialized Experience: One year of specialized experience which includes assisting in the design and development of engineered devices, equipment or systems using established criteria or specifications; or, assisting in the inspection and evaluation of engineered projects and resources; or, assisting in identifying engineering problems and recommending corrective action. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-05).OREducation: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering.ORSuperior Academic Achievement: Successful completion (or completion no later than December 2019), all the requirements for a bachelor’s degree with Superior Academic Achievement (S.A.A.). In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing – Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) – Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 (“B” or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 (“B+” or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership – Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).OR 5-Year Engineering Program: Successful completion (or will complete by December 2019) of a 5-year program of study (i.e., one designed to be completed in no less than 5 years) of at least 160 semester hours leading to a bachelor’s degree in engineering in an ABET accredited college or university.ORCombination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.EducationNOTE: Grade point averages will be rounded to one decimal point. For example, 2.95 will round to 3.0, and 2.94 will round to 2.9.NOTE: If more than 10 percent of your undergraduate course work (credit hours) was taken on a pass/fail or similar basis, your S.A.A. claim must be based on class standing or membership in an honor society and you must provide evidence of your class standing or honor society membership with your application. EducationIf selected, official college or university transcripts must be submitted. However, unofficial transcripts must be submitted at the time of application.FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html